Kayaks, Canoes, SUPs
Accesories
Crank Arm Bolts Pair- For Perception and Wilderness Systems Pedal Drives
$24.95 inc. GST
Pair of Hex headed Bolts to suit Perception and Wilderness Systems Pedal Drive Kayaks. These two bolts are replacements used secure the pedal cranks to the drive spindle and come with a dab of thread locking paste on the threads.
6 in stock
Deliveries to regional and remote take longer
Replacement crank arm bolts for Wilderness Systems Helix Pedal Drive and Perception kayaks with pedal drive system. Bolts come with lock tight on them. Will require a 8mm hex key/ wrench for installation.
Pack of 2.
Note you need to secure these with a large degree of force. Use of a a long 8mm allen (hex) key or torque wrench to get sufficient leverage is suggested.
Pedals/cranks are left and right (Left Pedal is threaded the opposite of the right pedal) ensure you have fitted the correct pedal to the correct side, however these bolts are standard threads and will fit on either crank.
Propeller orientation is key when installing crank arms to ensure the propeller is aligned correctly with the pedals for retraction (lifting) of the drive shaft out of the water.
Please use the manual to ensure installed correctly.
Part # 9800932
Brand
Perception kayaks
Wilderness Systems
Be the first to review “Crank Arm Bolts Pair- For Perception and Wilderness Systems Pedal Drives”
You must be logged in to post a review.
Reviews
There are no reviews yet.