Harmony 5 Inch Hatch Kit (Bayonet type) Grey with bag nuts bolts and rim

This is a complete 5 1/2 Inch (12.7cm) Hatch kit. Has all the parts needed to install a hatch from scratch or replace an existing hatch. This is the current model that is a bayonet style hatch fitting rather than a threaded screw in style hatch cover. This means it will secure quickly and easily with a quarter turn and can’t cross thread. It has a positive feel when properly closed providing further security against leakage.

The internal “catch” storage bag stops items from disappearing into the interior of your craft but can be removed to provide greater access.

Comes with

• Hatch Cover
• Hatch Rim
• Red Insert Bag
• Foam Hatch Rim Gasket
• 6 x Stainless steel Screws
• 6 x Rubber Well nuts
• Hatch leash cord
• 2 x P-Clip fittings to secure the cover and hatch bag
• 1x Stainless Steel Self Tapping Screw to attach cord to hatch cover
• Installation Instructions.

Part # 8023046

Rubber well nuts are used a bit unusually, they are used in place of a standard nut and in reverse this means they provide a seal to prevent leaking, can be held in place without use of a spanner when tightening or loosening as well as having no sharp protrusions making them safe for use with dry bags and other waterproof fabric items.

Previous model was black and in a threaded (screw in style) hatch but has the same part numbers.

A = 5.5 in

B = 6-3/4 in

C = 5-3/8 in

D = 6-1/8 in

Barcode: 729282033062