KeelEazy 7.6CM (3") Strip per metre

KeelEazy 7.6CM (3″) Strip per metre

$29.95 inc. GST

3″ KeelEazy is a protective two-inch-wide (76mm) by 1/32” thick strip made of PVC with an adhesive back. We cut your KeelEazy to order.

KeelEazy adheres to Polyethylene, thermoform ABS, and most marine varnish over wood. – available in black, white, red, orange, blue, green and yellow

Check out our range of PFDs and rescue gear
Deliveries to regional and remote take longer

3″ KeelEazy is a protective two-inch-wide (76mm) by 1/32” thick strip made of PVC with an adhesive back. We cut your KeelEazy to order – sold by the metre

KeelEazy adheres to Polyethylene, thermoform ABS, and most marine varnish over wood. – available in black, white, red, green.

This peel and stick material is lighter and more abrasion resistant than traditional fiberglass tape with gel coat. It can be applied to any composite or Thermoformed  kayak, Jet Ski, dingy, etc… and takes just minutes to install. Removes easily with a heat gun, apply it full length or on specific wear spots.

Available in 7 colours: Black, White, Red, Yellow, Green, Blue & Orange

Versatile, quick & inexpensive
The solution to avoiding scrapes, scuffs & dings; it sticks to almost any material

Self-adhesive PVC strip
Providing an extremely durable surface anywhere that abrasion is a concern

Ideally suited to the keel of a kayak or canoe
It is also used on boats, SUPs, jet skis, car doors etc….

Easily applied
To fibreglass, Polyethylene, thermoformed ABS, skin on frame, canvas, Roylex and metal surfaces and can be moulded over compound curves with the use of a heat gun

Ideal for rental fleets, schools & training centres
Giving an extra season on the boats and an increased return on investment

Colour

Black, Green, Red, White

Brand

KeelEazy

KeelEazy make self-adhesive (peel and stick) strips that provides a durable surface anywhere that abrasion is a concern. Ideally suited for the keel of kayaks, it is also used on boats, canoes, jet skis, car doors, etc.

Made in the USA
KeelEazy Strips are easily applied to fibreglass, polyethylene, thermoformed ABS and metal surfaces and can be moulded over compound curves with the use of a heat gun. The PVC material is only 1/32” thick and comes in 2”, 3” and 4” widths. The 2″ wide KeelEazy weighs only .6 ounces per foot.
Chris Mitchell, founder of KeelEazy, tells how KeelEazy got started: “In 2009, I was spending a great deal of time teaching surfing and hanging out at the ocean. Up here in Washington we have fewer choices than many places around the world, but my favorite is Hobuck Beach at the NW corner of Washington State. It is a beach break but a very gradual slope. At low tide the water line can be as much as a quarter mile from camp. With poly boats most people just pick up the stern and drag the bow on the fine sand. I tried it with a new composite boat (a heavy sea kayak) that I was testing. I stopped after about 25 yards and inspected the hull. I was amazed to find the gelcoat gone where it had contacted the sand. “I spent the rest of that summer trying all the kinds of tapes, films, and rubber strips that I could find to see if I could come up with a way to resolve this problem. It made no sense to me to add a fiberglass keel strip to the keel to protect it from the same material the boat was made of. I finally found a PVC material that could be mated with mechanical adhesive that worked great. With a few refinements, that is the KeelEazy we sell today. We have expanded the product line to include other specialty cuts to solve other abrasion problems.” Chris has since retired from KeelEazy and Paulette Bergh acquired the company in 2018. She operates KeelEazy out of Bellingham, WA where she also rows, sails, kayaks and does Stand Up Paddle-boarding as often possible.

Reviews

There are no reviews yet.

Be the first to review “KeelEazy 7.6CM (3″) Strip per metre”

Flat price shipping on non bulky goods $9.90 (more for remote)