Perception Track Mount Bolt Seat Mount

This is a longer 1 3/4 inch (4.5cm) imperial threaded G316 Stainless Steel bolt that inserts into kayak rails or tracks and is secured with a nut (typically a rubber coated thumb nut but any standard nut of the correct thread would work). Supplied as a part on Perception Pedal Drive kayaks to hold the seat in place it can also be used in most kayak tracks for other purposes.

Base Plate of the stainless steel bolt is approx. 2.9 cm long, 12 mm wide and nearly 3mm deep so suitable for a wide range of different brands of track or rail.

Part # 30100025

Note you will need an imperial threaded nut not a metric one if using for an alternate purpose to replacing an existing missing bolt.

This is a single replacement T Bolt (2 are required for each perception seat if you have mislaid them both. Whole kit is also available for the pilot seat)