Wilderness Systems rudder pin with Teflon Block

Rudder pin and black plastic centre of a Wilderness Systems rudder assembly.

Compatible with many Wilderness Systems rudders, circa 2000-2008.

Dimensions:

Overall height is 3 7/16 inches

Pin is 1 15/16 inches.

Pin Length, from bottom of block to rudder pin hole is 1 5/8 inches.

The depth of the rudder bracket should not exceed this measurement.

A single hole for a rudder pin ring is on the end of the 3/8 in. diameter pin.

Two 3/16″  holes (5/8 on centre), for Hex Bolts and Lock Nuts, and several slots are moulded into the black plastic block. Block is approximately 2 5/8 long by 1 1/4 high by 3/4 inches thick.

Please that to replace this part you will have to disassemble your rudder and reassemble – no instructions are provided.

This rudder block is not compatible with bayonet style fittings. The pin needs to protrude from the bottom of the gudgeon hole and will need a split ring to secure it. This item does not suit blind holes.

Part # 9800354

UPC 729282916587

WILDERNESS SYSTEMS Wilderness Systems Rudder Block With Pin

The Wilderness Systems Rudder Block with Pin is the replacement central pin and black plastic centre of the rudder assembly designed specifically for the rudder kit that goes on the Wilderness Systems Northstar Tandem Expedition Kayak. • Replacement rudder block with mounting pin • Designed specifically for the rudder kit that goes on the Wilderness Systems Northstar Tandem Expedition Kayak • Rudder kit not included