Surge Side Fin- iSUP Glue on Side Fin each

Single Replacement Side Fin can adding side fins to an isup without these or replacing a lost or damaged skeg on iSUPs. Lower profile allows the iSUP to roll up easily with fins in place and is great for paddling shallow or obstructed water/white water.

To fix into position you’ll want to compare the other fin and ensure you have the correct position for the replacement so it matches the other side and mark it with tape or marker etc. Then clean the area and the base of the fin with soapy water, sand the area, clean the area again (possibly with MEK or other appropriate solvent), apply a layer of adhesive either use what came with your repair kit or aquaseal, allow it to become tacky, apply the patch to the board, then press out any air between the fin and board. This is important.. so perhaps use a tool to concentrate the pressure and press firmly and really squeeze it down.