Kayaks, Canoes, SUPs
Accesories
Gear Aid Tenacious Tape Reflective 3 x 20 inch
$20.00 inc. GST
Reflective Tenacious Tape by Gear Aid is an all-purpose, reflective weatherproof repair tape that fixes rips, holes and gashes in almost all of your outdoor gear. Perfect for Paddling dry clothing like cags etc. It stays put no matter what Mother Nature dishes out and leaves no sticky mess.
1 x No Mess, Self adhesive, Strip 7.6 x 51 cm
3 in stock
Deliveries to regional and remote take longer
Tenacious Tape by Gear Don’t go unnoticed. Use Tenacious Tape Reflective to increase visibility and improve safety at night. This fabric tape uses glass bead technology to reflect light better than coloured or fluorescent tape. Stick on jackets, backpacks, shoes, bike gear/clothing, helmets, and pet accessories. This 7.6 x 51 cm strip (3 inch x 20 inch), its ultra-aggressive adhesive sticks to almost any surface without peeling. These stick on patches also perform in both wet and dry conditions. Take on darkness with Tenacious Tape Reflective and stay safe outdoors.
High Visibility – Enhance safety at night or in low-light conditions with tape featuring glass bead reflective technology
Peel & Stick – No sewing skills or heat required; simply remove backing and apply with pressure to outerwear and gear
Washable – Ultra-strong repair tape bonds to outdoor/synthetic fabrics including nylon and vinyl, and won’t peel off during a wash
Adjustable – Removable within 72 hours of application; available as strips or pre-cut patches
Multipurpose – Sticks to almost any surface and adds reflectivity to running gear, shoes, helmets and more
Material: polyester with glass bead technology
Size: 3” x 20” strip
Colour: silver
Application: peel and stick
Adheres To: nylon, polyester, fleece, vinyl, rubber, and non-oiled leather
Application Temperature: room temperature
Removable: yes
Washable: yes
Storage: store in a bag or container
Tenacious Tape Strip FAQ
Tenacious Tape by GEAR AID is an all-purpose repair tape that fixes rips, holes and tears on both fabric and non-fabric surfaces. Tenacious Tape the clean-adhesive technology allows you to remove or reposition the repair tape during the first 24 hours without leaving behind a sticky residue. Try that with duct tape.
INSTRUCTIONS 
1. Begin by cleaning the repair area with isopropyl alcohol to remove any dirt or body oils which may prevent a good bond. Trim any loose threads.
2. Cut out a patch with rounded corners that will overlap the repair area by at least 1/2” in all directions.
3. Apply the Tenacious Tape patch over the rip, tear or hole.
4. Smooth out any bubbles and ensure the edges lay flat. The adhesive will reach full strength after 24 hours.
5. For large holes, repeat the above steps on the opposite side of the fabric.
What does Tenacious Tape stick to?
Tenacious Tape is best applied to the following fabric types:
- Nylon
- Polyester
- Vinyl
- Canvas
- Rubber
- Bicast Leather (PU Leather)
- Non-Oiled Leather
- Vinyl Plastic (PVC)
- TPU
- EVA Plastic
- PET Plastic
- OPP Plastic
- Sunbrella®
- WINDSTOPPER®
Technical details
- 1 ½’’ x 60’’ roll (5 feet of tape)
- Utilizes PVC fabric
- Ultra-agressive adhesive can be applied with finger pressure
- Tape can be moved or repositioned within 24 hours without leaving behind a sticky residue
- Sticks to almost any surface
- Can be used on silnylon for a temporary emergency field repair
- Optimal operating temperature for initial adhesion = 50~104°F (10~40ºC)
- Machine washable
How to remove the backing
There is a perforation that runs down the middle of the tape. Simply fold the tape on either side of the fold and remove the backing. It is best to peel away the backing from the top of the tape where the Gear Aid logo appears.
Storage & care
Place unused portion in container or bag and store in cool, dry place.
Brand
Gear Aid
Be the first to review “Gear Aid Tenacious Tape Reflective 3 x 20 inch”
You must be logged in to post a review.
Reviews
There are no reviews yet.