Mission Rudder Spacer with Screws
$6.95 inc. GST
This is a part for Mission Kayaks Rudder Rear assembly. 2 Screws and a plastic axle. These are the small screws that hold the cheeks of the rear rudder mount onto the axle that the rudder blade rotates around to lift in and out of the water (when launching landing etc).
2 in stock
Deliveries to regional and remote take longer
Not the whole rudder. This is a spare part for a missing or damaged Mission kayaks rudder.
This is the small axle that goes between the rudder mount and through the sheaves (round spacer plates that help rotate the blade up and down- one on each side of the blade) and rudder blade in a mission rudder rear assembly.
Made up of Small G316 Stainless steel screws with a round/pan robertson drive head and a short plastic cylinder with a narrow shaft and locator slot (This indexes with the sheaves to ensure correct orientation of the blades when installed in the rudder sheaves. The screws can be substituted for any number of alternate screws if you lose a screw.
Robertson Head screws use the square headed driver (as opposed to phillips or flat headed screw drivers) See Pictures
| Weight | 1.3 kg |
|---|---|
| Dimensions | 60 × 20 × 15 cm |
Brand
Mission
Be the first to review “Mission Rudder Spacer with Screws”
You must be logged in to post a review.
You may also like…
Repair and Parts
Repair and Parts
OrigiNZ Foot Rests – for Ruddered Kayaks (Toe Tip Control) PAIR
Repair and Parts
Repair and Parts
Reviews
There are no reviews yet.